Table of Contents
Advertisement
parking brake, press the brake pedal until the parking brake
latch retracts.
1. Traction pedal
2. Mow speed limiter
3. Spacers
Tilt Steering Pedal
To tilt the steering wheel towards you, press the foot pedal
(Figure 14) down, and pull the steering tower toward you to
the most comfortable position and then release the pedal.
Headlight Switch
Pivot the switch downward to turn on the headlights
(Figure 15).
Throttle Control
Move the throttle control (Figure 15) forward to increase the
engine speed and rearward to decrease speed.
Figure 14
4. Brake pedal
5. Parking brake
6. Tilt steering pedal
1. Lower mow/raise control
lever
2. Key switch
3. InfoCenter
Key Switch
The key switch (Figure 15) has three positions: Off,
On/Preheat, and Start.
Lower Mow/Raise Control Lever
This lever (Figure 15) raises and lowers the cutting decks
and also starts and stops the mowers when the mowers are
enabled in the mow mode. When starting the decks in the
down position, this lever will turn the decks on if the PTO
and the mow speed limiter are engaged.
Enable/Disable Switch
Use the enable/disable switch (Figure 15) in conjunction with
the lower mow/raise control lever to operate the mowers.
The mowers cannot be lowered when the mow/transport
lever is in the transport position.
InfoCenter
The InfoCenter LCD display shows information about your
machine such as the operating status, various diagnostics and
other information about the machine (Figure 15).
Hydraulic Filter Restriction Indicator
With the engine running at normal operating temperature,
view the indicator (Figure 16), it should be in the Green zone.
When the indicator is in the Red zone, change the hydraulic
filters.
20
Figure 15
4. Enable/disable switch
5. Throttle control
6. Headlight switch
Advertisement
Table of Contents
