Installing The Procontrolfor Model Year 2009 And Older Only; Figure - Toro 41086 Operator's Manual

Procontrol spray system turf sprayer
Table of Contents

Advertisement

CAUTION
Many chemicals are hazardous and can cause
personal injury or environmental damage if you
apply them improperly.
Ensure that sprayer hose connections are secure
before operating the spray system.
Installing the ProControl
For Model Year 2009 and Older
only.
Installing the Console Computer
1. Remove the knockout plug in the dashboard and
insert the large grommet (Figure 3).
4
1
1. Large grommet
2. Mounting bracket
3. Console computer
2. Remove the mounting bracket from the console
computer and secure the mounting bracket to the
dashboard with 2 flange head screws (Figure 3).
3. Cut the plastic tie that secures the console computer
wiring harness under the dashboard.
4. Remove the 2 protective caps from the cable ends.
5. Insert the console control cable and speed sensor
cable from under the dashboard through the hole
with the large grommet.
6. Plug the cables into their proper receptacles in the
rear of the console computer.
3
4
5
2
G013301

Figure 3

4. Mounting knobs
5. Flange head screw (2)
7. Secure the cables to the console computer by
rotating the locking rings.
8. Attach the console computer to the mounting
bracket and secure it with the 2 mounting knobs
(Figure 3).
Mounting the Flowmeter
1. Disconnect the boom supply hose fitting from the
boom valve assembly (Figure 4).
6 1
2
4
4
1. Flowmeter
2. Boom supply hose (longer
section)
3. Boom supply hose (shorter
section)
2. Disconnect the boom supply hose fitting from the
tee located behind the boom valve assembly.
3. Measure, mark, and cut the supply hose as shown
in Figure 5.
To pump
27 in. (69 cm)
50 in. (1.3 m)
1. Longer supply hose
section
CAUTION
Many chemicals are hazardous and can cause
personal injury or environmental damage if you
apply them improperly.
Ensure that sprayer hose connections are secure
before operating the spray system.
5
6
3
5
5
Figure 4
4. Flowmeter mounting
bracket
5. Boom valve assembly
6. Worm gear screw clamp
1
2
To boom valves
15 in. (38 cm)
G013303
Figure 5
2. Shorter supply hose
section
G013302

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multi-pro 5700-dMulti-pro 5600

Table of Contents