Ip Environment Setup; Network Setup - LG 32LG710H Owner's Manual

The IP Environment Menu enables you to set up network features of the TV. Like the Installer Menu, the
IP Environment Menu is editable (with the Installer Remote) only if the TV is in Pass-through or Application
Tuning Mode and read-only when the TV is not in either of these modes.
Access the IP Environment Menu
1. Use the Installer Remote to enter the Installer Menu: Press MENU repeatedly until the on-screen menu
display no longer toggles, and then press 9-8-7-6 + ENTER.
2. Navigate to Installer Menu item 119 DATA CHANNEL, and press 2-5-3 + MENU to launch the IP
Environment Menu (see sample displays below).
Use the Up/Down arrow keys on the Installer Remote to select the desired menu option—Network Setup,
Offset Setup, or Pro:Centric—and then press ENTER. Refer to the following sections for information on each
of the IP Environment setup options.

Network Setup

If the TV is connected to a network with a DHCP server, by
default the server will automatically assign an IP address to the
TV. The Network Setup Menu options enable you to set up static
IP/network connections or to revert from static to DHCP settings.
Use the Up/Down arrow keys to navigate between fields.
1. With Network Setup selected, use the Left/Right arrow keys
on the Installer Remote to select Static or DHCP in the Mode
field.
2. (Static IP/network connections only) Complete the IP Address,
Subnet Mask, Gateway, DNS1, and DNS2 fields. Either key
in or use the Left/Right arrow keys to select the appropriate
values.
3. When you have completed all fields as necessary, navigate to
Apply, and then press ENTER.
4. Press MENU to return to TV viewing, or press RETURN to
return to the previous menu level.
Offset Setup
If necessary, due to an audio and/or video stream delay, the
Offset Setup Menu options enable you to compensate for
synchronization irregularities by allowing audio PTS, video PTS,
and PCR offset modifications. Note that any offset modifications
should be performed by qualified personnel only.
1. With Offset Setup selected, use the Up/Down arrow keys on
the Installer Remote to navigate to the appropriate field: Audio
PTS Offset, Video PTS Offset, or PCR Offset.
2. Use the Left/Right arrow keys to set the appropriate offset
value for the selected field. Offset values are represented in
10 ms intervals to 500 ms or -500 ms.
3. When you have completed all modifications as required,
press MENU to return to TV viewing, or press RETURN to
return to the previous menu level.
206-4200

IP Environment Setup

IP Environment
Mode
Network Setup
IP Address
Subnet Mask
Gateway
Offset Setup
DNS1
IP Environment
DNS2
MAC Address :
Pro:Centric
Network Setup
e8:5b:5b:63:97:3e
Offset Setup
IP Environment
Pro:Centric
Network Setup
Offset Setup
IP Environment
Audio PTS Offset
Pro:Centric
Network Setup
Video PTS Offset
PCR Offset
Offset Setup
IP Environment
Pro:Centric
Network Setup
Offset Setup
IP Environment
Pro:Centric
Network Setup
Move Prev.
► DHCP
►
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
Move
Prev.
0 0 0 0
Apply
Move Prev.
Move Prev.
0
► ►
0
0
Move
Prev.
Move Prev.
45