LG 32LG710H Owner's Manual page 152

(Continued from previous page)
3. (Optional) Run Auto Tuning.
Important: If you intend to use a USB memory device / .tlx file
for cloning purposes, DO NOT run Auto Tuning. If you Teach
a .tlx file with an auto-tuned/edited Channel Map to a Target
TV, this will put the Target TV in FTG Mode via CPU. If you
run Auto Tuning with the intension to clone the resulting
Channel Map, you must use a USB memory device / .tll file or
a clone programmer for this cloning purpose.
a) To search for all available analog and digital channels, go to the
Channel Menu, select the Auto Tuning option, and follow the
on-screen instructions.
b) Use the Channel Edit option in the Channel Menu to edit the
channel lineup, as necessary, to include only free to guest
(non-encrypted) channels.
• Add/delete channels per your system requirements.
• Use the Channel Label option in the Channel Menu to select the appropriate
trademark/icon for each channel's Channel-Time on-screen display. Icons are
available for familiar channels, such as ABC, CBS, NBC, etc. Identifiable labels
(icons) should enable the end user to readily know what common networks are
available.
Note: If you intend to clone the PTC and Installer Menu item 103 ATSC TUNE
MODE is set for Physical Channel tuning (default and recommended setting),
channels with minor channel numbers higher than 255 will not transfer correctly
in step 5. If item 103 is set for Virtual Channel tuning and either the major or
minor channel numbers are higher than 255, the channel(s) will not transfer
correctly in step 5.
Note: If you intend to clone the PTC, you can add the channel icons in this step or
as described in step 6. Also in step 6, you can add custom text labels for channels
without icons.
4. Determine the next appropriate step according to the cloning method you
intend to use.
• If using a USB memory device / .tll file or a clone programmer: Continue with step
5. You must perform this step to transfer the TV setup menu settings to the PTC in
order to clone the PTC successfully.
• If using a .tlx file: Proceed to step 7 to verify the TV setup. (Steps 5 and 6 are not
applicable for .tlx files.)
206-4200
Master TV Setup (Cont.)
CHANNEL
Auto Tuning
Manual Tuning
Channel Edit
Channel Label
(Optional) Use Channel Menu options
to run Auto Tuning, edit channels, and
select channel icons.
(Continued on next page)
Move Enter
13