External Equipment Connections; Vcr Setup; Cable Tv Setup; External A/V Source Setup - LG zenith L17W36 Operating Manual And Warranty

Lcd tv/monitor
Table of Contents

Advertisement

Installation
External
Equipment
Connections
Continued
- In Video mode, TV automatically
reverts to TV mode if the
fcr button or flashbk buttons are pressed.
Connection 1
Set VCR switch to 3 or 4 and then tune TV to the same
channel number.
Connection 2
---_,_ _
Typical
1. Connect the audio/video output jacks on VCR to the corre-
_'_
Antennas
sponding input jacks on the TV. When connecting the TV
f
to a VCR, match the jack colors (Video = yellow, Audio
....
Left = white, and Audio Right = red).
2. Insert a video tape into the VCR and press PLAY on the
...... _r_ oJ,
VCR. (Refer to the VCR owner's manual.)
3. Use the tv/video
button on the remote control to select
Direct
Video 1 or Video 2. (If connected to S-VIDEO on side
Connection
panel, select the S-Video external input source.)
[]
I!
iVCR
- After subscribing to a local cable TV service and installing a converter, you can watch cable TV programming.
- For further cable TV information,
contact a local cable service provider.
Connection 1
1. Select 3 or 4 with channel switch on cable box.
2. Tune the TV channel to the same selected output channel
of cable box.
3. Select channels at the cable box or with the cable box
remote control.
Connection 2
1. Connect the audio/video output jacks on Cable Box to the
corresponding
input jacks on the TV. When connecting
the TV to Cable Box, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right =
red).
2. Use the tv/video
button on the remote control to select
Video 1 or Video 2.
3. Select channels with the cable box remote control.
iJ e e® e® ee ®e
[]
[]
Connections
Connect the audiotvideo output jacks on the external A/V
equipment to the corresponding
input jacks on the TV.
When connecting the TV to external A/V equipment,
match the jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
Viewing
Setup
1. Turn on the external A/V equipment.
2. Use the tv/video
button on the remote control to
select Video 1 or Video 2.
3. Operate the corresponding
external equipment.
Refer
to external equipment operating guide.
® ® e
¢
®
External
Equipment
Camcorder
Video Game set
!2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zenith l23w36

Table of Contents