Ld660H/Ld665H Rear Jack Panel - LG 32LG710H Owner's Manual

Reference: LD660H/LD665H Rear Jack Panel
Restricted to software updates.
Initiates a hardware reset and
switches the TV to standby.
TV-LINK CFG
Use for direct PC-to-TV
FTG configuration.
LAN 2
Use for video IP and/or
network connections.
HDMI/DVI IN
2
1
INTERFACE
HDMI/DVI IN
Connection for
HDMI/DVI output
from external device.
RJP INTERFACE
Connection for Remote Jack
Pack (RJP) Control cable.
RGB IN (PC)
Connection for RGB
output from PC.
*
This stereo jack provides a mono speaker fixed-level,
1 watt output (audio +, audio -, w/ground shield). Do NOT
plug in a mono connector, as this may damage the TV.
58
UPDATE
RESET
LAN2
RESET
..........
TV-LINK CFG
..........
.....
.....
.....
AUDIO IN
RJP RGB IN (PC)
(RGB/DVI)
AUDIO IN (RGB/DVI)
Audio connection for
RGB or DVI device.
OPTICAL DIGITAL AUDIO OUT
Use for amps and home theater systems.
Note: In Standby Mode, this port is not
enabled.
LAN1 CONTROL/MPI
UPDATE
OPTICAL
VIDEO L/MONO-AUDIO-R
DIGITAL
AUDIO OUT
Y P P
L
B R
.....
....
RS-232C IN
(SERVICE ONLY)
RS-232C IN
Use for downloading
software updates, etc.
LAN 1
Use for video IP and/or
network connections.
GAME CONTROL/MPI
When the TV/EBL is in Pass-through Mode, the MPI
function enables an external MPI control device (i.e.,
clone programmer, VOD/PPV STB, etc.) to control the
TV. Game Control—EBL in LodgeNet PPV Mode only.
GAME
SPEAKER
OUT
8
R
SERVICE
ONLY
SPEAKER OUT (8Ω) *
Connect to 8 ohm self-powered
speaker input. Intended for
special applications, such as a
powered bathroom speaker
with volume control.
SERVICE ONLY
Restricted to software updates.
COMPONENT IN
Connection for component
output from external device.
AUDIO/VIDEO IN 1
Connection for composite
audio/video output from
external device.
206-4200