• Consult the dealer or an experienced radio/TV technician for help. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 15. Never touch this apparatus or antenna during a thun- der or lighting storm. 2. Keep these instructions. 16. When mounting a TV on the wall, make sure not to 3. Heed all warnings. install the TV by the hanging power and signal cables 4.
IMPORTANT SAFETY INSTRUCTIONS 24. Cleaning (Continued from previous page) When cleaning, unplug the power cord and rub gently 21. Grounding with a soft cloth to prevent scratching. Do not spray Ensure that you connect the earth ground wire to pre- water or other liquids directly on the TV as electric vent possible electric shock (i.e., a TV with a three- shock may occur.
Setup Checklist / Overview Setup Checklist Installation and Setup Checklist Commercial Mode Setup __ Unpack TV and all accessories. __ Complete Commercial Mode Setup (configure __ Install batteries in remote control. all relevant Installer Menu items as required of __ Install TV on VESA mount or stand. your institution and configure display features Note: It may be advisable to make all cable for the end user).
Pro:Centric TV Interactive Menu Features Important: Pro:Centric operation requires that Installer Menu item 119 DATA CHANNEL be set appropriately and that the TV be in PPV or FTG Mode. The interactive Pro:Centric TV enables guests—from the comfort of their hotel Channel Guide rooms—to view and select from a complete listing of hotel services and amenities.
LD650H/LD655H Rear Jack Panel OPTICAL DIGITAL AUDIO OUT Use for amps and home theater systems. Note: In standby mode, this port is not enabled. UPDATE Restricted to software updates. AUDIO/VIDEO IN 1 Connection for composite audio/video RESET output from external device. Press RESET to re-initialize the TV.
LG710H Rear Jack Panel TV-LINK CFG Use for local FTG configuration. UPDATE RESET Restricted to software updates. Press RESET to re-initialize the TV. GAME CONTROL (LodgeNet PPV Mode only) Restricted to service use only. OPTICAL DIGITAL AUDIO OUT Use for amps and home theater RGB IN (PC) systems.
Side Connections Panel / RF Antenna Connection Side Connections Panel (All LD650H/LD655H/LG710H TVs) USB IN Insert USB device for software updates or for picture/music entertainment, as applicable. A/V 2 Input L/MONO-AUDIO-R IN Connect to audio output jacks on external device. For only mono audio output, connect to Left audio input.
Configuration Utility in the FTG Configuration Application. Pages 16 to 20 describe Installer Menu items in detail. Installer Remote POWER The LG Installer Remote is supplied with and dedicated to operate the GUIDE PORTAL INFO TV. See next page for typical key functions in TV operating mode. Some DVD and VCR controls may be available for selected LG DVD/VCR products.
Installer Remote Control Typical Key Functions The LG Installer Remote illustrated below and throughout this document shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.
Commercial Mode Setup for Master TV This section describes how to set up a Master TV when the EBL is in Pass-through Mode. Note: Disconnect all Aux inputs. Under certain conditions, Auto Tuning (Channel Search) is disabled if there is an Aux input active. Note: Refer to “FTG Mode of Operation”...
Commercial Mode Setup for Master TV (Cont.) (Continued from previous page) 3. Run Auto Tuning (Channel Search). a) Search for all available analog and digital channels: Go to the Channel Menu, select the Auto Tuning option, and follow the CHANNEL Move Enter on-screen instructions.
Installer Menu Use the Installer Menu to set up or change operational settings. Refer to the table starting on the next page for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. Accessing the Installer Menu Make sure the TV is ON.
Page 16
Installer Menu (Cont.) Installer Menu Items 000 through 071 Menu Function Value Range Default Value Brief Description of Function and Comments Item INSTALLER SEQ 0 ~ 3 Leave default set to 0. POWER MANAGE 0 ~ 7 Sets number of hours of no activity before automatic shutoff. AC ON 0 / 1 Set to 1 to enable Auto Turn ON when AC power is applied.
Page 17
Installer Menu (Cont.) Installer Menu Items 073 through 119 Menu Function Value Range Default Value Brief Description of Function and Comments Item If set to 1 and Channel Override is 0, “NOT AVAILABLE” message is displayed CH NOT AVBLE 0 / 1 when directly accessing a channel not in the favorite Channel List.
Page 18
Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items NOTE: For items 007, 008, and 009 000 - INSTALLER SEQUENCE For legacy reasons, the scale used is 0 – 63. The PTC software will translate this to the 0 – 100 scale used by the TV. Specifi...
Page 19
Installer Menu (Cont.) 015 - SLEEP TIMER 034 - CAMPORT EN. (Camera Port Enable) If set to 1, the Sleep Timer feature may be used. If set to 0, the Set to 1 to enable Video 2 input on display panel. If set to 0, Video Sleep Timer is not available.
Page 20
Installer Menu (Cont.) 070 - FOR. CH-TIME (Channel-Time Display Foreground Color) 084 - PERMANENT BLK (Permanent Block) Set according to Color Chart: Allows Lock (Parental Control) blocking schemes to be permanent by disabling the blocking hours function. Set to 1 to install Paren- 0 = Black 3 = Cyan 6 = Yellow...
Installer Menu (Cont.) 103 - ATSC TUNE MODE • 6 = Scaler Model RJPs: DVI Mode Enables RJP feature for use with reduced cable bundle models. Sets ATSC tuning mode: Default set to 1 for Physical Channel In this mode, when an HDMI/DVI source is connected to the scan.
TV Setup Menus Overview On-screen setup menus control the features of the TV. Press MENU on the Installer Remote to access the TV setup menus, and set the TV features to the desired configuration for the end user. TIME CHANNEL PICTURE AUDIO OPTION...
Adding Channel Label Icons / Custom Channel Labels (2-5-4 + MENU Mode) Editing/Adding Channel Icons and/or Labels Editing and adding the labels can only be done if there are channels entered into the TV’s Channel Map either during If there is no pre-assigned icon, you can make a custom Commercial Mode Setup (see pages 13 to 14), by cloning, channel label of up to seven (7) characters to help identify or by using some PPV provider’s master remote controls.
FTG Mode of Operation FTG Confi guration Overview The following steps outline local FTG configuration of individual TVs. Since these models are equipped with the EBL module, they can also be broadcast configured in FTG Mode by a Free-To-Guest Management Appliance (FMA) head end device.
FTG Mode of Operation (Cont.) Determining the TV Operating Mode / FTG Channel Map Confi guration Utility Overview ASPECT RATIO Move Enter To determine the operating mode of the Function Menu TV, press MENU on the Installer Remote. Set By Program Shows that the EBL is in If the end user Function Menu (showing FTG Mode .
FTG Mode of Operation (Cont.) FTG Channel Map Confi guration Utility / FTG Channel Map Editor Overview The FTG Channel Map Editor shows a single Logical Channel’s Data and the FTG Channel Map. LOGICAL CHANNEL MAPPING CUSTOM CHANNEL LABELS/ICONS SET CHANNEL ATTRIBUTES Select a Logical Channel number, then Enter custom labels and select icons by Check/select Encrypted, OSD, or...
FTG Mode of Operation (Cont.) FTG Installer Menu Confi guration Utility Overview CONFIGURATION SETTINGS HOSPITAL-GRADE TV ONLY Select tabs for categories of Installer Set Hospital items on Installer Menu Menu items to set up TV. for hospital-grade TVs. INSTALLER DEFAULTS LEARN Click to reset FTG Installer Menu items shown in the FTG Configuration...
Cloning Overview / Clonable Menu Features IMPORTANT CLONING INFORMATION Before you begin cloning: There are three options for cloning a Master TV Setup: • Complete the Commercial Mode Setup procedure on • Using a USB memory device pages 13 to 14. •...
Cloning Procedures Learning / Teaching a Master TV Setup using a USB Memory Device USB Cloning Notes • Read the IMPORTANT CLONING INFORMATION on page 28 before beginning any cloning procedures. • Do not remove the TV power cord or the USB memory device while Learning or Teaching, as doing so may harm the USB memory device.
Cloning Procedures (Cont.) Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer Warning: Do not connect a clone programmer to any PPV card installed in the Master TV or any MPI port while the TV is in PPV Mode, or the clone programmer and the PPV card will be damaged.
(6) DISPLAY CLONE SETUP Since the TLL-1100A’s time cannot be set directly, the current time needs CLONE CLOCK = XX:XX to be copied from an LG TV equipped with MPI input capability. CLOCK = XX:XX THE CLONE IS VERSION VX.X.X...
Cloning Procedures (Cont.) Learning / Teaching a Master TV Setup using an LT2002 Clone Programmer Warning: Do not connect a clone programmer to any PPV card installed in the Master TV or any MPI port while the TV is in PPV Mode, or the clone programmer and the PPV card will be damaged.
TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER. be copied from an LG TV equipped with MPI input capability. After the time is copied to the LT2002 clone programmer, the current time can then be transferred to another TV. (This can be a Master TV or another TV which has already had the features set up.)
Remote Jack Pack / TV Connections & Setup Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE to 001).
Reference: Upgrading TV/PTC Software with a USB Memory Device Checking the Software Versions XXLG710H PTC INSTALLER MENU You can check the software versions of the TV by accessing the Installer Menu: Press Typical Installer MENU repeatedly until the on-screen menu Menu INSTALLER SEQ locks up, and then press 9-8-7-6 + ENTER.
Reference: TV Camport Auto Sense Operation CAMPORT (Side Video) Functionality Control The Camport Auto Sense function is enabled when: 1. Installer Menu item 034 CAMPORT EN is set to 1 AND Item 034 Item 040 Side Video 2. Installer Menu item 040 AUTO CAMPORT is enabled (1). CAMPORT EN AUTO CAMPORT Operation...
Reference: TV Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DIRECT ACCESS START AUX STATUS TYPE TYPE 0xD2 Tuning DATA STATUS SOURCE Installer Menu 0x41 SOURCES CURRENT AV TYPE 0x0D ASSIGN- ENABLED (R/W) SOURCE (R) MENT SOURCE (R) OLD_ OLD_ Source...
Reference: b-LAN Setup & Overview The b-LAN module is internal to the TV. It allows the hotel/institution head end equipment to communicate, via the institution’s RF distribution system, with the TV for configuration and control. The b-LAN module also com- prises the data tuner required for Pro:Centric operation.
Wrong battery polarity. Check that “+” and “-” match in battery compartment. Too much light in room. Dim room light. Wrong Installer Remote. Requires compatible Installer Remote. Contact your LG dealer. Picture Reception Normal picture, Audio muted. Press MUTE or use Volume Up key to increase sound level.
Troubleshooting (Cont.) Troubleshooting Flowchart Controller Quick Check STATUS Plug into AC connected LED on PTC to AC Power outlet. Board Power? blinking? Cycle the power by removing and reconnecting the AC Power cord. Then, observe POWER LED on front of TV. POWER Bad Analog or LED lit?
Troubleshooting (Cont.) Commercial Mode Check / FTG Operation Troubleshooting Commercial Mode Check Press POWER on Installer Remote. responded? Leave the TV set ON. Go to Installer Menu by pressing MENU until the TV stops responding. stopped Stopped TV is in responding or responding Commercial Mode.
Then redo Learn/Teach. (Learning usually takes about 90 sec- onds; Teaching usually takes 3 to 4 minutes.) Remote does not operate Wrong Installer Remote. Only use an LG Installer Remote to operate clone programmer clone programmer. with TV. Clone menu does not dis- MPI cord not connected.
Glossary of Terms A list of defi nitions for some of the words found in this guide. 75 OHM RF CABLE COMPOSITE VIDEO PHYSICAL CHANNEL NUMBER The wire that comes from an off-air Typical video jack, uses one wire for The actual channel number.
Document Revision History / Notes Document Revision History Date Description August 2010 Revision A: New document October 2010 Revision B: Power Savings updates for LD65xH TVs; troubleshooting update Product documentation is available online at: www.LGsolutions.com/products. From the Products page, select TVs, Systems & Solutions, then LCD TVs, then the applicable TV. Click the Literature & Downloads tab at the bottom of the TV page, and select the required document(s) from the Downloads list.
1-888-865-3026 www.LGsolutions.com Pro:Idiom is a registered trademark of Zenith Electronics LLC. Pro:Centric is a trademark of LG Electronics U.S.A., Inc. b-LAN is a trademark of LodgeNet Interactive Corporation. All other trademarks or registered trademarks are the property of their respective owners.