Lv555H Rear Jack Panel - LG 32LG710H Owner's Manual

Initiates a hardware reset and
switches the TV to standby.
Restricted to software updates.
HDMI/DVI IN
Connection for HDMI/DVI
output from external device.
LAN1/LAN2
Use for video IP and/or
network connections.
TV-LINK CFG
Use for direct
PC-to-TV FTG
configuration.
RJP INTERFACE
Connection for Remote Jack
Pack (RJP) Control cable.
RGB IN (PC)
Connection for RGB
output from PC.
*
This stereo jack provides a mono speaker fixed-level,
1 watt output (audio +, audio -, w/ground shield). Do NOT
plug in a mono connector, as this may damage the TV.
206-4200
RESET
UPDATE
RESET
LAN1
UPDATE
HDMI/DVI IN
TV-LINK CFG
..........
1
LAN2
RJP
.....
.....
.....
AUDIO IN
RGB IN (PC)
INTERFACE
(RGB/DVI)
AUDIO IN (RGB/DVI)
Audio connection for
RGB or DVI device.
Reference: LV555H Rear Jack Panel
SPEAKER OUT (8Ω) *
Connect to 8 ohm self-powered speaker input.
Intended for special applications, such as a powered
bathroom speaker with volume control.
OPTICAL DIGITAL AUDIO OUT
Use for amps and home theater systems.
Note: In standby mode, this port is not enabled.
SERVICE ONLY
Restricted to software updates.
GAME CONTROL/MPI
When the TV/EBL is in Pass-through Mode, the MPI
function enables an external MPI control device (i.e.,
clone programmer, VOD/PPV STB, etc.) to control the
TV. Game Control—EBL in LodgeNet PPV Mode only.
GAME CONTROL
SPEAKER SERVICE
/MPI
(8 ) ONLY
OUT
OPTICAL
VIDEO L/MONO-AUDIO-R
DIGITAL
AUDIO OUT
Y P P
L
B R
.....
....
RS-232C IN
(SERVICE ONLY)
RS-232C IN
Use for downloading
software updates, etc.
COMPONENT IN
Connection for component
output from external device.
AUDIO/VIDEO IN 1
Connection for composite
audio/video output from
external device.
ANTENNA IN
R
ANTENNA IN
Connect to
Antenna/CATV.
59