LG 32LG710H Owner's Manual page 20

PREPARATION
32/37/42/47/55LD650H, 32/37/42LD655H, 32/37/42LD660H, 32/37/42LD665H
INSTALLATION
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the parts of the STAND BODY with
the STAND BASE of the TV.
STAND BODY
M4 x 20
3
Insert the stand as shown.
4
Tighten the stand
x 4
with the four screws
(provided as parts of the TV).
Tighten the two of these four screws and
the two Torx plus star head screws
x 2 x 2
(provided as parts of the TV) to secure the
TV. Tighten the two Torx plus star head screws with a star
head driver bit (not provided as parts of the TV).
! !
NOTE
When assembling the desk type stand, make sure
G
! !
the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the protuct
? ?
installation). Do not over tighten.
20
STAND BASE
or
DETACHMENT
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Remove the four screws that hold the base on.
3
Detach the stand from the TV.
PROTECTION COVER
After removing the stand, install the included
PROTECTION COVER over the hole for the stand.
Press the PROTECTION COVER into the TV until
you hear it click.