Dash Disassembly - Metra Electronics 95-7309 Installation Instructions Manual

Elantra (with double DIN radio)
1996-2000
1. Unclip and remove the dimmer
switch panel, and then remove (1)
Phillips screw exposed behind the
panel. (Figure A)
2. Unclip and remove the shifter trim
panel. (Figure B)
3. Remove (1) Phillips screw at the
bottom of the radio trim panel.
(Figure C)
4. Unclip and remove the temperature
control cable under the drivers side
of the dash from the white plastic
bracket.
5. Remove (4) Phillips screws securing
the radio, and then remove the radio.
Continue to kit assembly

Dash Disassembly

(Figure A)
(Figure B)
(Figure C)
95-7309
Santa Fe 2001-2006
1. Remove the ashtray, and then
remove (2) Phillips screws now
exposed in the cavity. (Figure A)
2. Unclip and remove the climate
control panel. (Figure B)
3. Remove (2) Phillips screws facing
up at bottom of radio trim panel.
(Figure C)
4. Unclip and remove the radio trim
panel. (Figure D)
5. Remove (4) Phillips screws
securing the radio, and then
remove the radio.
Continue to kit assembly
(Figure A)
2
(Figure B)
(Figure C)
(Figure D)