Rotating The Cisco Logo - Cisco Aironet 1130AG Hardware Installation Manual

Chapter 2 Installing the Access Point

Rotating the Cisco Logo

The Cisco logo on the top of the unit can be rotated to correctly position the logo for any mounting
arrangement; for example, when the unit is mounted on a vertical wall. The logo should always be easy
to read.
To rotate the Cisco logo, follow these steps:
Step 1 Place the end of an opened paper clip into each of the holes on the logo assembly (see
Figure 2-16
1
Using the paper clips, rotate the logo until you reach the desired orientation. Detents are provided to help
Step 2
you align the logo for 90 degree rotations.
Remove the paper clips.
Step 3
OL-6226-02
Cisco Logo Holes
Status LED
1
2
2
Logo assembly holes
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
Rotating the Cisco Logo
Figure 2-16).
2-23