STEP 4:
STEP 5:
SP620
1. Slide the Handlebar Post (pt.17) into
the handlebar post housing on the main
frame. You will have to slacken the
knurled section of the Spring
Adjustment Knob (pt.7) and pull the
knob back and then select the desired
height. Release the knob and retighten
the knurled portion.
2. Fix the Handlebar (pt.18) and the
Computer Holder (pt. 68) with four sets
of Ø8 the Spring Washer (pt.19) and
M8*15 the Bolt (pt.20).
PLEASE ENSURE THE HANDLEBAR IS FIXED
TIGHTLY
3. Slide the Computer (pt.69) onto the
Computer Holder
1. The Pedals (pt.1 L & pt.1 R) are marked
"L" and "R" - Left and Right.
Connect them to their appropriate crank
arms. The right crank arm is on the right-
hand side of the cycle as you sit on it.
Note that the Right pedal should be threaded on
clockwise and the Left pedal anticlockwise.
10