Using The Ir Remote Control - HIKVISION DS-8104AH(L) I-S Series User Manual

HIKVISION DS-8104AH(L)I-S User‟s Manual
•
1/MENU Button: The 1/MENU button works as numeric [1]. Pressing this button will return the
user to the Main menu (after successful login). The 1/MENU button will also bring up Sensitivity
Interface settings.
•
2ABC/VOIP: The 2ABC button works as numeric [2] and letter [ABC]. When it is used in a list
field will select all items on the list.
•
3DEF/INFO: The 3DEF button works as numeric [3] and letter [DEF]. It is also used to cycle
through tab pages.
•
4GHI/ESC: The 4GHI/ESC button works as numeric [4] and letter [GHI], it is also used to escape
to the previous menu
•
5JKL/EDIT: The 5JKL/EDIT button works as numeric [5] and letter [JKL]. The 5JKL/EDIT
button is used to edit text fields. When editing text fields, it will also function as a Backspace
button to delete the character in front of the cursor. On checkbox fields, pressing the 5JKL/EDIT
button will tick the checkbox. In Playback mode, it can be used to generate video clips for backup.
•
6MNO/PLAY: The 6MNO/PLAY button works as numeric [6] and letter [MNO]. It is used to enter
the Playback menu. It is also used to turn audio on/off in the Playback menu.
•
7PQRS/REC: The 7PQRS/REC button works as numeric [7] and letter [PQRS]. It is also used to
enter the Manual Record interface.
•
8TUV/PTZ: The 8TUV/PTZ button works as numeric [8] and letter [TUV]. It is also used to enter
the PTZ Control mode.
•
9WXYZ/PREV: The 9WXYZ/PREVIEW button works as numeric [9] and letter [WXYZ]. It is
also used to switch between single screen and multi-screen mode.
•
0/A: The 0/A button works as numeric [0]. It is also used to switch between input methods (upper
and lowercase alphabet, symbols and numeric input). It can also be used to clear entire masked
areas, such as in the Motion Detection and Privacy Mask menus.
•
SHIFT: The SHIFT button is used for switch button action between numeric button and control
button.
4. DIRECTION/ENTER Buttons:
•
DIRECTION Buttons: The DIRECTION buttons are used to navigate between different fields and
items in menus. In Playback mode, the Up and Down button is used to speed up and slow down
recorded video. The Left and Right button will jump 30s backward and forward in a video. In
Preview mode, these buttons can be used to cycle through channels.
•
ENTER Button: The ENTER button is used to confirm selection in any of the menu modes. It can
also be used to tick checkbox fields. In Playback mode, it can be used to play or pause the video. In
Single Play mode, pressing the ENTER button will advance the video by a single frame.
5. POWER Button: The POWER button is used for power on or power off the DVR.
6. LCD: Display local menu and preview.
Note:
DS-8104AHI-S DVR is without LCD.
Note:
It is important to note that you must click the EDIT button on either the remote or front panel on a text field
before you‟re able to edit its content. After you‟re done entering text, you must hit the ENTER button to be able to
move on to the next field.

Using the IR Remote Control

Your DVR may also be controlled with the included IR remote control, shown in Figure 4.
Batteries (2x AAA) must be installed before operating.
12