Table of Contents
Advertisement
HIKVISION DS-8104AH(L)I-S User‟s Manual
Network Protocol
The Serial Protocol is used for receiving the card No. and other information by directly receiving the data sent from the
serial port connected.
1.
Enter ATM Setting menu. Click Menu > Setting >ATM to enter ATM Settings menu.
2.
Click the ATM Enable checkbox to enable ATM function, and then select the connection type to Serial
Protocol.
3.
Click the Set button to enter the ATM232 settings menu.
4.
Configure ATM232 settings, shown as Figure 10, including baud rate, data bit, stop bit, parity, flow control,
etc.
Note:
The network protocol provides HIKVISION selectable only.
Note:
The Serial Interception and Serial Protocol cannot be selected simultaneously.
93
Advertisement
Table of Contents
