Table of Contents
Advertisement
HIKVISION DS-8104AH(L)I-S User‟s Manual
Network Protocol
The Network Protocol is used for receiving the card No. and other information by adopting Server or Client mode to set
up TCP connection with ATM.
1.
Enter ATM Setting menu, shown in Figure 11. Click Menu > Setting >ATM to enter ATM Settings menu.
2.
Click the ATM Enable checkbox to enable ATM function, and then select the connection type to Network
Protocol.
Figure 11. ATM Settings Menu
3.
Click the Set button to enter the DVR listening port settings menu.
Note:
The network protocol provides HIKVISION selectable only.
4.
Set the DVR listening port, shown as Figure 12 below.
Figure 12. Network Protocol Menu
92
Advertisement
Table of Contents
