ITech IT6322 Manual page 12

For example：ITECH, 6322, 000000000000111101,V1.68
*OPC
When all orders before this order are executed, OPC is 1 of the standard event status register.
Order syntax：*OPC
Quest syntax：*OPC？
Example：*OPC
*PSC
This order control if power supply send a query or not when it is reset.
1|ON：
When power supply is reset, operation event enable register, query event enable register
and standard event status register are all reset.
0|OFF：
The data of operation event enable register, quest event enable register and standard event
status enable register is stored in nonvolatile register, and is recalled when power supply is reset.
Order syntax：*PSC
Parameter：0|1|ON|OFF
Return parameter：data stored
Example：*PSC ON
*RST
This order reset the power supply to default setting.
Order syntax：*RST
Example：*RST
*SRE
This order can set the parameter of status byte enableregister. Setting parameter can determine
which byte value of status byte register is 1 and the byte will enable RQS of status byte register is 1.
Bit definition of status byte enable register is as the same as the status byte register.
Order syntax：*SRE <parameter>
Parameter：0~255
Reset value：consult order *PSC
Example：*SRE 110
*STB？
This order can read the data from status byte register. After executing this order, status byte register
is reset.
Order syntax：*STB？
Return parameter：<NR1>
Example：*STB？
*SAV
This order can save the parameters of power supply to register. These parameter contains constant
12