Suction Hose - Toyota GRJ120L Installation Manual

[3] COMPRESSOR
[1]
BOLT
(M6 x 14)
[4] NUT (M6)
[3] BOLT
(M8 x 14)
[2] SUCTION TUBE
[1]

SUCTION HOSE

[1] NUT (M6)
[2] SUCTION HOSE
[3]
SEE:UNDER SIDE
[2] SUCTION HOSE
[1] SUCTION HOSE
(7) SUCTION HOSE
(a) Route the suction hose in front of the engine
block.
BC2623
(b) Connect the suction hose to the compressor
using a nut.
Tightening Torque:
9.8 N•m (100 kgf•cm, 7.2 ft•lbf)
BC2624
(c) Fasten the suction hose clamp to the chain
cover using a bolt.
BC2625
(d) Connect the suction hose to the suction tube
using a nut.
(e) Fasten the suction hose bracket to the body
using a bolt.
- 43 -
00502437EA