[1]
LIQUID TUBE No.1
[2]
NUT (M6)
[1] SEE: UNDER SIDE
[4]
BOLT
(M6 x 25)
[1]
LIQUID TUBE No.1
[1]
BRACKET
[2]
LIQUID TUBE NO.1
[3]
CONDENSER
[2]
CLAMP
(4)
LIQUID TUBE No.1
(a) Route and set the liquid tube No.1 in front of the
condenser.
NOTE
Pass the liquid tube No.1 through the radiator
support panel hole as shown.
BC1952
(b) Fasten the liquid tube No.1 bracket to the right
side condenser bracket using a nut.
BC1953
(c) Connect the liquid tube No.1 to the condenser
using a bolt.
Tightening Torque
5.4 N•m (55 kgf•cm, 4.0 ft•lbf)
BC1954
(d) Fasten the liquid tube No.1 to the right side body
using the clamp as shown.
BC1955
- 37 -
00502437EA