Toyota GRJ120L Installation Manual page 20

[1] EXPANSION VALVE
[3]LIQUID&SUCTION TUBE
[1]
COVER
[1] VEHICLE HARNESS (20-P)
[4]
ENGINE
CONTOROLLER
[2]
HEX SOCKET
BOLT(M5 x 53)
SEE :A
[3]
[1]
[3]
SEE :A
[2]
TAPPING SCREW
BOLT(M5 x 12)
[1]
GROMMET
[2] A/C AMPLIFIER
[3]
BOLT (M6 x 14)
(d) Fasten the liquid tube and suction tube to the
expansion valve using two hexagon socket
bolts.
Tightening Torque
3.5 N•m (35 kgf•cm, 2.6 ft•lbf)
B000746
(e) Install the cover to the heater unit using the
tapping screw.
NOTE
HEATER Fasten the cover guide edge as shown. (SEE:A)
[4]
UNIT
BC1913
(4) GROMMET
(a) Install the grommet to the bulkhead.
BC2607
(5) A/C AMPLIFIER
(a) Install the A/C amplifier to the engine controller
using a bolt.
(b) Connect the vehicle harness (20-P) to the A/C
amplifier.
B000632
- 15 -
00502437EA