[1] RADIATOR UPPER COVER
(11 CLIP POINT)
[1]
BATTERY & BATTERY CARRIER
1-2. INSTALLATION INSIDE ENGINE
COMPARTMENT
CAUTION
1. Before starting installation, remove the (–)
terminal of the battery.
2. Before making any hoses and tubes
connections, apply a few drops of compressor
oil to the seat of O-ring and coupling nuts.
3. When tightening and loosening the fittings, use
two wrenches for support.
4. Ensure fender covers are in position.
(1)
REMOVAL OF PARTS
(a) Radiator support upper cover
BC1931
(b) Battery and battery carrier
BC2608
- 25 -
00502437EA