Toyota GRJ120L Installation Manual page 36

[1]
[1] BRACKET
[2]
HAND TIGHTEN
[3]
[1] CONDENSER
[1] RIGHT SIDE [2]
BRACKET
BOLT
[3]
(M6 x 14)
VEHICLE HARNESS
CONNECTOR (3-P)
BOLT
(M6 x 16)
[2] BOLT
(M6 x 14)
HAND TIGHTEN
[4] LEFT SIDE
[2]
BRACKET
BOLT
[3]
(M6 x 14)
(f)
BC2616
(3) CONDENSER
(a) Loosely install the condenser brackets to the
BC1946
(b) After inserting the condenser from bottom, hand
[3]
BC1947
(c) Fasten the condenser (right side, left side) using
CAUTION
Make sure that the rubber bush on the body flange
is securely fitted.
BC1948
- 31 -
00502437EA
Connect the vehicle harness connector (3-P) to
the Mg.cluth connector.
radiator upper support.
tighten the condenser tightening bolts.
brackets and bolts as shown.