Martin MAC 2000 Wash User Manual page 20

C H A N G I N G C O L O R F I L T E R S
Additional color filters can be ordered from Martin.
To ensure the best performance, lenses must be fitted with the coated surface away from the lamp.
To change a color filter:
1 Disconnect the fixture from power and allow it to cool.
2 Lock the head horizontally with the top cover up.
3 Remove the top cover of the fixture using a flathead screwdriver to unlock the four quarter-turn screws.
4 Remove the two screws holding the color wheel module in place using a Philips screwdriver. Disconnect the
cables and lift the whole module out of the fixture.
5 Remove filters using your fingers and a soft cloth to protect the lens.
20
P
T O
T O P
29 / 28
MAC 2000 Wash
10
Cable connections