Specifications; Attachments/Accessories; Operation; Think Safety First - Toro 30809 Groundsmaster 3500-G Operator's Manual

Specifications

Note: Specifications and design are subject to change
without notice.
Overall Width
Width of Cut
Length
Height to top of ROPS
Wheel base
Track width
Ground clearance
Weight with cutting units
Cutting Deck
Length
Width
Height
Weight

Attachments/Accessories

To best protect your investment and maintain optimal
performance of your Toro equipment, count on Toro genuine
parts. When it comes to reliability, Toro delivers replacement
parts designed to the exact engineering specification of our
equipment. For peace of mind, insist on Toro genuine parts.
182 cm (71.8 inch)
173 cm (68 inch)
295 cm (116 inch)
180 cm (70.8 inch)
149 cm (58.5 inch)
145 cm (57 inch)
15.3 cm (6 inch)
963 kg (2,124 lb)
86.4 cm (34 inch)
86.4 cm (34 inch)
24.4 cm (9.6 inch)
to carrier mount
26.7 cm (10–1/2 inch)
at 3/4 inch height of cut
34.9 cm (13–3/4 inch) at 4
inches height of cut
88 kg (195 lb)

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.

Think Safety First

Carefully read all safety instructions and symbols in the
safety section. Knowing this information could help you or
bystanders avoid injury.
DANGER
Operating on wet grass or steep slopes can cause
sliding and loss of control.
Wheels dropping over edges can cause rollovers,
which may result in serious injury, death, or
drowning.
Use the seat belt.
Read and follow the rollover protection instructions
and warnings.
To avoid loss of control and possibility of rollover:
• Do not operate near drop-offs or near water.
• Do not operate on slopes greater than 25º.
• Reduce speed and use extreme caution on
slopes.
• Avoid sudden turns or rapid speed changes.
CAUTION
This machine produces sound levels that can cause
hearing loss through extended periods of exposure.
Wear hearing protection when operating this
machine.
The use of protective equipment for eyes, ears, hands, feet,
and head is recommended.
1
1. Wear safety glasses.

Checking the Engine-Oil Level

Service Interval: Before each use or daily
19
G009027
Figure 20
2. Wear hearing protection.
2