Sound Power Level; Sound Pressure Level; Vibration Level - Toro 30809 Groundsmaster 3500-G Operator's Manual

•
Carefully release pressure from components with stored
energy.
•
Disconnect the battery or remove spark plug wire before
making any repairs. Disconnect the negative terminal first
and the positive last. Reconnect the positive first and
negative last.
•
Use care when checking blades. Wrap the blade(s) or
wear gloves, and use caution when servicing them. Only
replace blades. Never straighten or weld them.
•
Keep hands and feet away from moving parts. If possible,
do not make adjustments with the engine running.
•
Keep all parts in good working condition and all hardware
tightened. Replace worn or damaged decals.
•
Keep your body and hands away from pin-hole leaks or
nozzles that eject hydraulic fluid under high pressure.
If fluid is injected into the skin, it must be surgically
removed within a few hours, by a doctor familiar with this
form of injury or gangrene may result.
•
Hydraulic fluid escaping under pressure can have
sufficient force to penetrate the skin and cause serious
injury. Use paper or cardboard, not your hands, to search
for leaks.
•
Before disconnecting or performing any work on
the hydraulic system, all pressure in the system must
be relieved by stopping the engine and lowering the
cutting-units to the ground.
•
Make sure that all hydraulic-line connectors are tight and
all hydraulic hoses and lines are in good condition before
applying pressure to the system.
•
If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and any parts of
the body away from the cutting-units, attachments, and
any moving parts. Keep everyone away.
•
Do not overspeed the engine by changing governor
settings. To ensure safety and accuracy, have an
Authorized Toro Distributor check the maximum engine
speed with a tachometer.
•
The engine must be shut off before checking the oil or
adding oil to the crankcase.
•
If major repairs are ever needed or if assistance is desired,
contact an Authorized Toro Distributor.
•
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement parts
and accessories made by other manufacturers could be
dangerous, and such use could void the product warranty.
Hauling
•
Use care when loading or unloading the machine into a
trailer or truck.
•
Use full width ramps for loading machine into trailer or
truck.
•
Tie the machine down securely using straps, chains, cable,
or ropes. Both front and rear straps should be directed
down and outward from the machine.

Sound Power Level

This unit has a guaranteed sound power level of 106 dBA,
which includes an Uncertainty Value (K) of 1 dBA.
Sound power level was determined according to the
procedures outlined in ISO 11094.

Sound Pressure Level

This unit has a sound pressure level at the operator's ear of 93
dBA, which includes an Uncertainty Value (K) of 1 dBA.
Sound pressure level was determined according to the
procedures outlined in EN 836.

Vibration Level

Hand-Arm
Measured vibration level for right hand = 0.5 m/s
Measured vibration level for left hand = 0.7 m/s
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the procedures
outlined in EN 836.
Whole Body
Measured vibration level = 0.44 m/s
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the procedures
outlined in EN 836.
6
2
2
2
2
2