Figure 40
•
Mow/Transport slide
Figure 41
•
Belt-tension pivot
(Figure
Figure 42
(Figure
41)
42)
•
Steering cylinder
(Figure
Note: If desired, install an additional grease fitting in
the other end of the steering cylinder. Remove the tire,
install the fitting, grease the fitting, remove the fitting, and
install the plug
(Figure
•
Cutting unit spindle-shaft bearings (2 per cutting unit)
(Figure
45)
Note: Either fitting can be used, which ever is more
accessible. Pump grease into the fitting until a small
amount appears at bottom of the spindle housing (under
the cutting unit).
35
43).
Figure 43
44).
Figure 44
Figure 45