Download Print this page

Advertisement

18
NOTE
10. Select the Country Code of the country where the Access Point is deployed. Selecting a proper country
is a critical task while configuring the Access Point, as it defines the correct channels of operation and
ensures compliance to the regulations of the selected country. This field is only available for the Typical
Setup Wizard.
11. Select Next to set the Access Point's network mode.
12. The Typical Setup Wizard displays the Network Topology screen to define how the Access Point handles
network traffic.
13. Select an Access Point Mode from the available options.
If designating the Access Point as a Standalone AP, Motorola Solutions
recommends the Access Point's UI be used exclusively to define its
device configuration, and not the CLI. The CLI provides the ability to
define more than one profile and the UI does not. Consequently, the two
interfaces cannot be used collectively to manage profiles without an
administrator encountering problems.
AP 6522M Access Point

Advertisement

   Also See for Motorola AP 6522M

Comments to this Manuals

Symbols: 0
Latest comments: