Hard Drive - HP ENVY 17 Maintenance And Service Manual

Hard drive

Description
2.0-TB, 5400-rpm
1.5-TB, 5400-rpm
1.0-TB, 5400-rpm
1.0-TB, 5400-rpm, hybrid
750-GB, 5400-rpm
750-GB, 5400-rpm, hybrid
500-GB, 5400-rpm for use with HP ENVY 15 Notebook PC computer models
Hard Drive Hardware Kit (not illustrated):
For use only on HP ENVY 17 Notebook PC computer models
For use only on HP ENVY 17 Notebook PC computer models
Before removing the primary hard drive or secondary hard drive (select models only), follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the base enclosure and keyboard/top cover (see
7. Remove the USB connector board (see
Remove the primary hard drive:
▲ Disconnect the hard drive cable from the system board (1), and then tilt the hard drive (2) and lift to
remove it (3).
Battery on page 32).
Optical drive on page
USB board on page
33).
Keyboard/top cover on page
56).
Component replacement procedures
Spare part number
801888-005
747375-005
778192-005
731999-005
778190-005
732001-005
778188-005
763705-001
762504-001
36).
57