Battery Board (Select Models Only) - HP ENVY 17 Maintenance And Service Manual

Battery board (select models only)

Description
Battery board For use only on HP ENVY 17 Notebook PC
The battery board is for select HP ENVY 17 Notebook PC computer models.
Before removing the battery board, follow these steps:
1. Disconnect all external devices connected to the computer.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
3. Remove the battery (see
4. Remove the optical drive (see
5. Remove the base enclosure and keyboard/top cover (see
Remove the battery board:
1. Turn the computer, with the front edge toward you.
2. Remove the two Phillips screws (1).
3. Lift the battery board (2) to remove it.
Reverse this procedure to install the battery board.
Battery on page 32).
Optical drive on page 33).
Keyboard/top cover on page
Component replacement procedures
Spare part number
763710-001
36).
53