Can-Am outlander 400 Operator's Manual page 124

TYPICAL
Properly reinstall removed parts in the
reverse order of their removal.
Beam Aiming Adjustment
Adjust beam aiming as follows:
Turn adjustment screws to adjust
beam height and side orientation to
your convenience. Adjust both head-
lamps evenly.
vmo2006-005-040_b
1. Headlamp cover
2. Adjustment screws
Taillight
To have access to bulb, pull on taillight
to release it from its rubber grommets.
_____________________
122
vmo2008-001-005_a
Turn and pull lamp socket to expose
bulb.
vmo2008-001-006
Push the bulb in and hold while turning
counterclockwise to release.
Install the new bulb by first pushing in
while turning clockwise.
Reinstall all removed parts.