Safety Precautions; Laser Safety; Safety Warning - Pantum P2200 Series User Manual

Safety Precautions

Laser Safety

The laser radiation is harmful to the human body. Since laser components are completely
sealed in the printer, laser radiation will not leak. To avoid laser radiation, please do not
randomly disassemble the printer!
The printer follows the provisions of Class 1 laser products under CFR standard. The printer
has a Class III B laser diode, which has no laser radiation leakage among laser components.
The following label is attached to the laser components inside the printer:

Safety Warning

Please note the following safety warnings before using the printer:
There is high-voltage electrode inside the printer. Before
cleaning the printer, make sure the power is turned off!
Plugging and unplugging the power cord plug with a
wet hand can result in an electric shock.
The fuser unit is hot when and after
printing. Touching the fuser unit (the
shaded area as shown) may cause burns!
The fuser unit is attached with a high temperature
warning label. Please do not remove or damage
this label.
Warning
II