Pantum P2200 Series User Manual page 17

d) Load the paper into the automatic feeder tray with the print-side up.
P2500 Series
Note: • Before loading paper, please unfold the stacked paper to avoid a paper jam or
feed error,and then load the paper into the tray print-side up.
e) Adjust the paper stop to keep the paper in position. To ensure normal paper feeding, adjust
the bottom paper stop
stop to match the paper size.
P2500 Series
Note: • If the paper loaded into the automatic feeder tray at one time exceeds 150 pages,
paper will jam or cannot be fed in.
• When using the printed paper, please make the side to be printed (the blank side)
up.
• When printing on A5 paper, it is recommended that the paper is fed in landscape
orientation, which can extend the service life of the laser toner cartridge.
2.3.2. Loading into the Manual Feeder Tray
Note: • Only P2900 series products support manual feeding.
a) Open the feeder tray.
into the slot to keep it from slipping out, and then adjust the blue
P2900 Series
P2900 Series
2-5