11
SERVICE WORK ON THE CHASSIS
11.9
Removing the lower triple clamp
–
Position brake caliper, mount and tighten screws
Guideline
Screw, brake caliper
–
Position the brake line. Mount the clamp and screws
K00208-11
Finishing work
–
Install the front wheel.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Dismount the front fender. (
Main work
–
Remove fuel tank breather
–
Remove nut
and place it on one side.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
K00210-10
–
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
K00214-10
M8
(
p. 58)
(
p. 58)
(
p. 30)
p. 34)
p. 35)
.
. Remove screw
, take off top triple clamp with the handlebar
.
.
20 Nm
Loctite
(14.8 lbf ft)
.
p. 28)
31
®
243™