11
SERVICE WORK ON THE CHASSIS
11.15
Installing the start number plate
11.16
Dismounting the front fender
11.17
Installing the front fender
–
Attach the start number plate to the brake line.
–
Position the start number plate.
Holding lugs
H00139-10
–
Mount and tighten screw
Guideline
Remaining screws, chassis
H00140-10
–
Remove screws
602674-10
–
Position the fender with drill holes
plate.
The holding lugs engage in the drilled holes.
H00141-10
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
602674-11
engage in the fender.
.
. Remove the front fender.
in the holding lugs on the start number
M6
10 Nm (7.4 lbf ft)
.
M6
10 Nm (7.4 lbf ft)
35