Setting Up Your Camera; Install The Batteries - HP Photosmart E427 User Manual

2
Setting up your
camera

Install the batteries

1. Open the Battery/Memory card door
by sliding the door latch as indicated
on the Battery/Memory card door.
2. Insert the batteries.
3. Close the Battery/Memory card
door.
Note Turn the camera off before
removing the batteries. If using
rechargeable NiMH batteries, fully charge the batteries
before using them the first time.
Camera usage and battery type will affect
battery life. Alkaline batteries provide far less
battery life than either Photo Lithium or NiMH
batteries. For complete information, see Appendix A in
the electronic User Guide.
Battery Minimum Maximum Average
type
Alkaline 80
NiMH 140
Photo 300
Lithium
8
Number of shots
160 120
230 200
600 375
HP Photosmart E427 Digital Camera
CIPA
110
200
375