Checking The Device Name Of The Printer - Canon PIXMA MX926 Online Manual

Checking the Device Name of the Printer

This section describes the procedures for checking the settings of the Bluetooth unit on the LCD of the
printer in preparation for Bluetooth printing.
Canon IJ printers with the Bluetooth interface are divided into two types. One is equipped with a graphic
LCD, and the other with a text LCD.
If you need more information about the Bluetooth settings, see
1. Make sure that the printer is turned on.
Confirming that the Power Is On
2. Attach the Bluetooth unit.
For information about how to attach the Bluetooth unit, see
Printer.
3. Display the Bluetooth settings (Graphic LCD)/Bluetooth settings (Text LCD)
screen on the LCD.
For information about how to display the Bluetooth settings (Graphic LCD)/Bluetooth settings (Text
LCD) screen, refer to Changing the Machine Settings on the LCD.
Graphic LCD
Text LCD
Note
If the Bluetooth settings (Graphic LCD)/Bluetooth settings (Text LCD) screen is not displayed
on the LCD, the Bluetooth unit may not be attached correctly. Remove the Bluetooth unit from the
printer and attach it once again.
For details, see
If the Bluetooth settings (Graphic LCD)/Bluetooth settings (Text LCD) screen is not yet
displayed, the Bluetooth unit may be faulty. In this case, contact the service center.
4. Select Select device name (Graphic LCD)/Device name (Text LCD).
The Select device name (Graphic LCD)/Device name (Text LCD) screen is displayed.
Attaching to and Removing from the
Setting Bluetooth Printing.
Attaching to and Removing from the
Printer.