Manual Transmission; Selecting Reverse Gear; Selector Lever Positions; Automatic Transmission - Ford ENDEAVOUR Owner's Manual

Table of Contents

Advertisement

MANUAL TRANSMISSION

Selecting Reverse Gear

Do not engage reverse gear when your
vehicle is moving. This can cause damage
to the transmission.
E184729
Raise the collar when you select reverse
gear.

AUTOMATIC TRANSMISSION

WARNINGS
Always apply the parking brake fully
and make sure you shift into park (P).
Switch the ignition off and remove
the key whenever you leave your vehicle.
Do not apply the brake pedal and
accelerator pedal simultaneously.
Applying both pedals simultaneously
for more than a few seconds will limit
engine performance, which may result in
difficulty maintaining speed in traffic and
could lead to serious injury.
Endeavour (TEC), EB3B-19G219-ZCA enIND
Transmission
Note: A cold engine has a higher idle speed.
This will increase the tendency for your
vehicle to creep when you have selected a
drive gear.

Selector lever positions

E132720
P
R
N
D
S
S-
S+
Press the button on the selector lever to
select reverse (R) or park (P). The current
gear is shown in the display screen.
Park (P)
Move the transmission selector lever
to park (P) only when your vehicle is
stationary.
120
2
Park
Reverse
Neutral
Drive
Sport mode and manual shifting
Manual shift down
Manual shift up
WARNING
1

Advertisement

Table of Contents
loading

Table of Contents