Removing A Road Wheel - Ford ENDEAVOUR Owner's Manual

E134692

Removing a Road Wheel

WARNINGS
Park your vehicle so that you do not
obstruct the flow of traffic or place
yourself in any danger and set up a
warning triangle.
Turn on the hazard warning flasher
and set up a warning triangle.
Make sure that your vehicle is on firm
and level ground with the front
wheels pointing straight ahead.
Switch the ignition off and apply the
parking brake.
If your vehicle has a manual
transmission, shift into first or reverse
gear. If your vehicle has an automatic
transmission, shift into park (P).
Make sure all passengers are out of
your vehicle.
Check the diagonally opposite wheel
to the punctured tire with an
appropriate block or wheel chock.
Do not work on your vehicle when
the jack is the only support. If the
vehicle slips off the jack, you or
someone else could be seriously injured.
Endeavour (TEC), EB3B-19G219-ZCA enIND
Wheels and Tires
Note: Do not lay alloy road wheels face
down on the ground.
E79153
1.
2. Insert the assembled wheel brace and
E134693
3. Using the wheel brace, remove the lug
220
WARNINGS
Make sure that the vehicle jack is
vertical to the jacking point and the
base is flat on the ground.
1
3
Assemble the wheel brace and winch
extension tool.
winch extension tool into the vehicle
jack and raise your vehicle until the tire
is clear of the ground.
nuts and the road wheel.
2