Pairing Subsequent Cell Phones; Using Voice Commands - Ford ENDEAVOUR Owner's Manual

2. Press the PHONE button. When the
audio display indicates that no phones
are paired, select the option to add.
3. When a message to begin pairing
appears in the audio display, search for
SYNC on your cell phone to start the
pairing process.
4. Select SYNC on your cell phone.
5. Wait until the PIN appears on the
phone display. Compare the PIN on the
phone with the PIN shown in the audio
display and accept the request on the
phone and the vehicle display. The
display indicates when the pairing is
successful.
Note: In some cases the phone will request
to enter a PIN. Enter the six-digit PIN
provided by the system in the audio display.
The display indicates when the pairing is
successful.
Depending on your cell phone's capability
and your market, the system may prompt
you with questions such as setting the
current cell phone as the primary cell
phone (the cell phone the system
automatically tries to connect with first
when you switch the ignition on) or
downloading your phonebook.
The information display may show your
cell phone's battery charge level and signal
strength.

Using Voice Commands

E142599
Make sure to switch on your phone's
Bluetooth feature before starting the
search. See your device's manual if
necessary.
Endeavour (TEC), EB3B-19G219-ZCA enIND
SYNC
Press the voice button and when
prompted say:
Voice Command
(pair ([Bluetooth]
device | phone |
Bluetooth audio) |
add phone)
Words in square brackets [ ] are optional
and do not have to be spoken for the
system to understand the command.
Depending on your phone's capability and
your market, the system may prompt you
with questions, such as setting the current
phone as the primary phone (the phone
SYNC automatically tries to connect with
first upon vehicle start-up) and
downloading your phonebook.

Pairing Subsequent Cell Phones

Wirelessly pairing your cell phone with the
system allows you to make and receive
hands-free calls.
Note: You must switch the ignition and
radio on.
Note: To scroll through the menus, press
the up or down arrows on your audio system.
1. Make sure the Bluetooth feature on
your cell phone is switched on before
starting the search. Refer to your
device's manual if necessary.
2. Press the PHONE button.
3. Select the option for Bluetooth devices.
4. Press the OK button.
5. Select the option to add. This starts
the pairing process.
6. When a message to begin pairing
appears in the audio display, search for
SYNC on your device to start the
pairing process.
249
Action and Descrip-
tion
Follow the instruc-
tions on the audio
display.