Side Repeater; Approach Lamp And Side Repeater; Replacing The Front Parking Bulb - Ford ENDEAVOUR Owner's Manual

4. Install the new bulb in reverse order.
Replacing the Low Beam Headlamp
Bulb
E205825
1. Remove the service cap.
2. Disconnect the electrical connector.
3. Remove the bulb from the headlamp
assembly by turning it
counterclockwise and pull it straight
1
out.
4. Release the retainer spring and remove
the bulb from the headlamp assembly
by pulling it straight out.
1
- Projector type headlamp assembly.
2
- Reflector type headlamp assembly.

Replacing the Front Parking Bulb

1. Turn the bulb assembly
counterclockwise and remove it from
the headlamp assembly.
2. Remove the bulb by gently pulling it
straight out of the socket.
3. Install the new bulb in reverse order.
Replacing the Direction Indicator Lamp
Bulb
1. Turn the bulb assembly
counterclockwise and remove it from
the headlamp assembly.
Endeavour (TEC), EB3B-19G219-ZCA enIND
Maintenance
2. Remove the bulb from the bulb socket
3. Install the new bulb in reverse order.

Side Repeater

1
3
1.
2. Disconnect the electrical connector.

Approach Lamp and Side Repeater

2
Note: These lamps are not serviceable,
contact an authorized dealer if it fails.
199
by gently pushing it into the socket and
turning it counterclockwise.
1
E133682
Slide the lens to the rear and remove
it.
E133683
A Side repeater.
B Approach lamp.
2
A
B