Table of Contents
Advertisement
Optional Equipment
7
Unscrew the on/off/battery plate from the control panel (see Figure 9). Pull the plate and wiring
forward (see Figure 10).
8
The control panel has plastic wire-locks attached to the back (see Figure 11). Un-hook the wires
from the wire-locks and remove the wiring harness, plate, battery holder, and ac adapter (see
Figure 12). These items may be discarded.
9
Use the included torx wrench to remove the stock regulator (see Figure 13). These items may be
discarded.
© Travis Industries
(for qualified installers only)
Figure 9
Figure 11
4090507
65
Figure 10
Figure 12
Figure 13
100-01217_000
Advertisement
Table of Contents
