Optional Equipment
Fireback Installation
Turn off gas to the appliance and make sure it has fully cooled prior to conducting
WARNING:
service.
Remove the glass frame and logs.
1
2
Remove the front and rear grates (NOTE: lift the burner slightly to remove the grate - see the
illustration below).
NOTE: If the accent light deflectors have been bent, carefully bend the accent light deflectors
inwards on both sides (NOTE: do not over-bend these deflectors, they will break off if over-bent).
3
Remove and discard the steel ember trays.
© Travis Industries
(for qualified installers only)
4090507
55
100-01217_000