Conference - Yealink SIP-T22P User Manual

User Guide SIP-T22P IP Phone
To configure call waiting via phone user interface:
1. Press Menu->Features->Call Waiting.
2. Press
field.
3. Press
4. Press the Save soft key to accept the change or the Back soft key to cancel.
5. (Optional.)Enter the call waiting on code or off code respectively in the CW On
Code or CW Off Code field.
You can also configure the call waiting feature via web user interface at the path
Phone->Features->General Information>>.
You can create a conference with other parties using the phone's local conference
feature. You can create a conference between an active call and a call on hold (on the
same or another line) by pressing the Conf soft key. The network conference feature
allows you to add and remove specific conference parties.
Note The network conference feature is not available on all servers. For more information,
contact your system administrator.
The SIP-T22P IP phone supports up to 3 parties (including yourself) in a conference call.
This is called Local Conference and is the default method of conferencing.
To set up a local conference call:
1. Place a call to the first party.
2. Press the Conf soft key to create a new call.
The active call is placed on hold.
74
or , or the Switch soft key to select Enable from the Call Waiting
or , or the Switch soft key to select Enable from the Play Tone field.