Yealink SIP-T22P User Manual page 83

User Guide SIP-T22P IP Phone
- Press Menu->Features->Call Forward.
Press
Press
key.
Press
Press the Save soft key to accept the change.
To disable call forward in custom mode for all accounts:
Do one of the following:
- Press
Press the All Off soft key to disable the call forward.
Press the Save soft key to accept the change.
- Press Menu->Features->Call Forward.
Press the All Off soft key to disable the call forward.
Press the Save soft key to accept the change.
Dynamic Forwarding
To forward an incoming call to another party:
1. When the phone is ringing, press the Fwd soft key.
2. Enter the number you want to forward the incoming call to.
3. Press
The incoming call is forwarded. The LCD screen prompts a call forward message.
You can transfer a call to another party in one of the three ways:
Blind Transfer: Transfer a call directly to another party without consulting.

Semi-Attended Transfer: Transfer a call when receiving ringback.

Attended Transfer: Transfer a call with prior consulting.

To perform a blind transfer:
1. Press
72
or to select the desired account, then press the Enter soft key.
or to select the desired forwarding type, then press the Enter soft
, or the Switch soft key to select Disable to disable the call forward.
when the phone is idle.
, , or the Send soft key.
or the Tran soft key during a call.