Greasing The Steering Head Bearing; Removing The Front Fender - KTM 300 EXC Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.15

Greasing the steering head bearing

12.16

Removing the front fender

(200 XC‑W US, 250 XC‑W US, 300 EXC BR, 300 XC‑W US)
–
Loosen screws
–
Loosen and retighten screw
Guideline
Screw, top steering head
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
–
Tighten screws
102279-10
Guideline
Screw, top triple clamp
–
Tighten screw
Guideline
Screw, top steering stem
Finishing work
–
Check the play of the steering head bearing. (
–
Remove the motorcycle from the lift stand. (
(200 XC‑W US, 250 XC‑W US, 300 EXC BR, 300 XC‑W US)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
(EXC EU, EXC Six Days, EXC EU/AU, Six Days)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
800010-10
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
B02155-10
–
Remove screws
B02156-11
 
and .

.

.

.
( p. 56)
( p. 57)
( p. 57)
( p. 59)

.

. Remove the front fender.
M20x1.5 12 Nm
(8.9 lbf ft)
M8 20 Nm
(14.8 lbf ft)
M8 20 Nm
(14.8 lbf ft)
p. 62)
p. 52)
p. 98)
64