Display Mode Speed/A2 (Average Speed 2); Display Mode Speed/S1 (Stop Watch 1); Display Mode Speed/S2 (Stop Watch 2) - KTM 300 EXC Owner's Manual

7 SPEEDOMETER
7.20

Display mode SPEED/A2 (average speed 2)

7.21

Display mode SPEED/S1 (stop watch 1)

7.22

Display mode SPEED/S2 (stop watch 2)

–
Repeatedly press the button
play.
A2 (average speed 2) shows the average speed on the basis of the current speed if the
stop watch S2 (stop watch 2) is running.
Info
The displayed value can differ from the actual average speed if S2 was not
stopped after the ride.
Briefly press the
400326-01
button .
Press the button
for 2–3 seconds.
Press the button
for 2–3 seconds.
Briefly press the
button .
–
Repeatedly press the button
play.
S1 (Stop watch 1) shows the riding time based on TR1 and continues running as soon
as an impulse arrives from the wheel speed sensor.
The calculation of this value starts with the first impulse from the wheel speed sensor
and ends 3 seconds after the last impulse.
Press the button
for 2–3 seconds.
Briefly press the
400327-01
button .
Press the button
for 2–3 seconds.
Briefly press the
button .
–
Repeatedly press the button
play.
S2 (Stop watch 2) is a manual stop watch.
If S2 is running in the background, the display S2 flashes on the speedometer.
Press the button
for 2–3 seconds.
Briefly press the
button .
Press the button
400328-01
for 2–3 seconds.
Briefly press the
button .
briefly until A2 appears at the top right of the dis-
Next display mode
No function
No function
No function
briefly until S1 appears at the top right of the dis-
Displays of TR1, A1 and S1 are reset to 0,0.
Next display mode
No function
No function
briefly until S2 appears at the top right of the dis-
The displays of S2 and A2 are set to 0,0.
Next display mode
No function
Starts or stops S2.
27