Download Print this page

Advertisement

18
SERVICE WORK ON THE ENGINE
0 0 1
1
18.5

Adding gear oil

Info
Too little gear oil or poor-quality gear oil results in premature wear of the transmission.
The gear oil level must be checked when the engine is cold.
Main work
Remove filler plug
Gear oil
(All 125/200
models)
Gear oil
(All 250/300 mod-
els)
Mount and tighten the oil filler plug.
401955-10
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
Start the engine and check that it is oil-tight.
Finishing work
Check the gear oil level. (
Install the engine guard. (
Preparatory work
Park the motorcycle on a level surface.
Main work
(All 125/200 models)
Remove screw
B02173-10
(All 250/300 models)
Remove screw
102298-10
Remove filler plug
Add gear oil until it emerges from the opening used to check the gear oil level.
Engine oil (15W/50) (
Mount and tighten the gear oil level check screw.
Guideline
(All 125/200 models)
Screw, gear oil level check
401955-11
and fill up with gear oil.
0.70 l (0.74 qt.)
0.80 l (0.85 qt.)
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
p. 111)
p. 80)
from the opening used to check the gear oil level.
from the opening used to check the gear oil level.
.
p. 141)
Engine oil (15W/50) (
p. 141)
Engine oil (15W/50) (
p. 141)
M6
10 Nm
(7.4 lbf ft)
113

Advertisement

COMING SOON

   Also See for KTM 300 EXC

   Related Manuals for KTM 300 EXC

Comments to this Manuals

Symbols: 0
Latest comments:
  • Email bahadori Feb 26, 2017 09:23:
    ktm exc 300
    HI,, unknown model of serial number?? VBK89A2011​M334008 thanks -----my Gmail is Sb62111@gm​ail.com