Table Of Functions - KTM 300 EXC Owner's Manual

7 SPEEDOMETER
7.23

Table of functions

Display Press the but-
ton
seconds.
Display mode The display
SPEED/H (service changes to the
hours) Setup menu of
the speedome-
ter functions.
Setup menu No function
Setting the unit of No function
measurement
Display mode The display
SPEED/CLK (time) changes to the
Setup menu of
the clock.
Setting the clock Increases the
value
Display mode The stop watch
SPEED/LAP (lap and the lap time
time) are reset.
Viewing the lap The stop watch
time and the lap time
are reset.
Display mode No function
SPEED/ODO
(odometer)
Displays of TR1,
Display mode
SPEED/TR1 (trip A1 and S1 are
master 1) reset to 0,0.
Display mode Clears the val-
SPEED/TR2 (trip ues TR2 and A2.
master 2)
Setting TR2 (trip
Increases value
master 2) of TR2.
Display mode Displays of TR1,
SPEED/A1 (average A1 and S1 are
speed 1) reset to 0,0.
Display mode No function
SPEED/A2 (average
speed 2)
Display mode Displays of TR1,
SPEED/S1 (stop A1 and S1 are
watch 1) reset to 0,0.
Display mode The displays of
SPEED/S2 (stop S2 and A2 are
watch 2) set to 0,0.
Briefly press the
for 2–3 button .
Next display
mode
Activates the
flashing display
and changes to
the next display
Starts selection,
activates Km/h
display
Next display
mode
Increases the
value
Next display
mode
Select a lap
from 1–10
Next display
mode
Next display
mode
Next display
mode
Increases value
of TR2.
Next display
mode
Next display
mode
Next display
mode
Next display
mode
Press the but- Briefly press the
ton for 2–3 button
seconds.
No function No function
No function Deactivates the
flashing display
and changes to
the next display
No function Activates Mph
display
No function No function
Reduces the Reduces the
value value
Stops the clock. Starts the stop
watch or stop
the current lap
time measure-
ment, stores it
and the stop
watch starts the
next lap.
No function View the next
lap time.
No function No function
No function No function
Reduces value Reduces value
of TR2. of TR2.
Reduces value Reduces value
of TR2. of TR2.
No function No function
No function No function
No function No function
No function Starts or stops
S2.
Wait 3–5 sec-
. onds
Changes to the
next display
without changes
Changes to the
next display,
changes from
selection to the
Setup menu
Changes to the
next value
28
Wait 10–12 sec-
onds
Setup menu
starts, stores
the settings,
and changes to
H or ODO.
Saves and
closes the Setup
menu
Closes the
SETUP menu
Saves and
closes the Setup
menu