Setting Neo:6 Mode - Samsung HW-D600 User Manual

Setting NEO:6 Mode

You can play back 2 channel sound over 5.1 or 7.1 channels when enjoying music or a movie.
1. Press the SETUP/MENU button on the remote control.
•
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the ▲▼ buttons to select SURROUND, and then press
2.
the ENTER button.
3. Press the ▲▼ buttons to select DTS NEO:6, and then press
the ENTER button.
4. Press the ENTER buttons to set the C-IMAGE mode you want.
Press the ◄ ► buttons to set the C-IMAGE from 0 to 5.
This parameter adjusts the centre image through the front and
centre speakers. "5" is the wider.
Using NEO:6 Mode
Press the NEO:6 button on the remote control.
•
MUSIC : When listening to music, you can experience sound effects as if you are listening to the
actual performance.
•
CINEMA : Adds realism to the movie soundtrack.
•
OFF : Output the original signal as it is without applying the sound fi eld effect or any other sound
effect.
✎
NOTE

NEO:6 works only for 2-ch audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
HW-D600_D650S_ELS_0603.indd 39 HW-D600_D650S_ELS_0603.indd 39


39
English
2011-06-03 2011-06-03 12:40:33 12:40:33