Table of Contents
Advertisement
Connections
High-bandwidth Digital Content Protection System (HDCP) support
To play digital contents through the HDMI connection, both the connected external device and TV must
support High-bandwidth Digital Content Protection System (HDCP). This product supports HDCP.
A TV with a DVI-D jack (TV supporting HDCP)
A TV with a DVI-D jack (TV not supporting HDCP)
✎
NOTE
Audio from SACD discs will not be heard with this connection. To play a DVD disc whose copyright is
protected by CPPM, use a player supporting CPPM.
The quality of the audio output through the HDMI jack (sampling frequency and bit rate) may be limited by the
performance of the connected device.
Since HDMI connection supports both video and audio, you don't have to connect an additional audio cable.
Using Anynet+ (HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote
control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an HDMI Cable.
This is only available with SAMSUNG TVs and SAMSUNG AV Products that support Anynet+.
1.
Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 17)
2.
Set the Anynet+ function on your TV.
(See the TV instructions manual for more information.)
•
You can operate the volume on the AV receiver by using Volume buttons on the TV remote control.
To Turn on Anynet+
1.
Press the SETUP/MENU button on the remote control.
•
Each time the button is pressed, the mode switches between INPUT and SETUP OFF.
2.
Press the ▲▼ buttons to select OPTION, and then press the ENTER button.
3.
Press the ▲▼ buttons to select HDMI SETUP, and then press the ENTER button.
4.
Press the ▲▼ buttons to select HDMI ANYNET+, and then press the ENTER button.
5.
Press the ▲▼ buttons to set ANYNET+ to ON, and then press the ENTER button.
To exit setup mode
•
Press the SETUP/MENU or EXIT button on the remote control.
SETUP OFF appears on the display and Setup Mode is exited.
✎
NOTE
If you use an HDMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV
receiver using the TV's remote control. This function is available only in connection with Samsung
TV and DVD player supporting Anynet + (HDMI-CEC).
Please check your TV for the ANYNET+ logo. If your TV has an ANYNET+ logo, then it supports
the Anynet+ function.
When you are making Anynet+ connection, do not connect more than two AV receivers (Anynet+
installed). Otherwise, it can cause a malfunction.
18
English
HW-D600_D650S_ELS_0603.indd 18
HW-D600_D650S_ELS_0603.indd 18
Compatibility with a TV Supporting HDMI
A TV with an HDMI jack.
HDMI Function
Video/Audio
Video
-
2011-06-03
2011-06-03
12:39:56
12:39:56
Advertisement
Table of Contents
