Table of Contents
Advertisement
,
SETTING TONE CONTROL
•
rB ·
The Tone Control function can be applied to all channels except for the subwoofer.
This will enable you to adjust the bass and treble level.
1. Press the SETUP/MENU button on the remote control.
• Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
2.
Press the ENTER button to select SETUP ENTER.
3.
Press the ... T buttons to select TONE CONTROL, and then press the
ENTER or
~
button.
4. Press the'"
T
buttons to select the option you want, and then press the
ENTER or
~
button.
• Each time you press this button, TONE
-7
BASS
-7
TREBLE will be
selected in turn.
5.
Press the ...
T
buttons to set the Tone Control mode you want.
• If it is set to TONE OFF, the Tone Control function will be disabled.
• You can adjust it from -6 to +6dB by 1 step.
• The sound gets quieter at -6dB and louder at +6dB.
- To exit setup mode -
• Press the SETUP/MENU button on the remote control.
SETUP OFF appears on the display and Setup Mode is exited.
SETTING NEO:6 MODE
-II-'hlr
'_II'IfC
EN
TEH~
,- '-I II I
T
n
'-II
,_ ,_,,'If .
ii. '_'
L
You can play back 2 channel sound over 7.1 channels when enjoying music or a movie,
1. Press the SETUP/MENU button on the remote control.
• Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
2. Press the ENTER button to select SETUP ENTER.
3. Press the'" T buttons to select NEO:6 SETUP, and then press the
ENTER or
~
button.
4. .
Press the'"
T
buttons to set the C-IMAGE mode you want.
You can set C-IMAGE from 0 to 5
This parameter adjusts the center image through the front and center
speakers. "5" is the wider.
- To exit setup mode-
• Press the SETUP/MENU button on the remote control.
SETUP OFF appears on the display and Setup Mode is exited,
Using NEO:6 mode
,- - I
h."OI: ,-
I_
,
II
'UL
rill'Trn
c,',!
!
crt.
Press the NEO:6 button on the remote control.
• MUSIC : When listening to music, you can experience sound effects as if you are listening to the actual
performance.
• CINEMA : Adds realism to the movie soundtrack.
• OFF : Output the original signal as it is without applying the sound field effect or any other sound effect.
(EJ •
NEO:6 works only for 2-ch audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
47
Advertisement
Table of Contents
